EAA Witness - Tanfoglio-large frame 17 round 9mm Mec-Gar magazine with the anti-friction coating MGWIT9LFAFC.
This magazine is for the large frame EAA Witness/Tanfoglio with the wider magwell (same as EAA magazine 101935). This is the magazine you need for the EAA Witness/Tangolio Stock II and Stock III (large frame models).
May not fit pistols with an extended magwell. The Witness Limited and Witness Gold Team models require an Aluminum Base Pad to be compatible in the magwell.
These magazines won’t fit the Witness P Match without the Witness factory OEM base pad 102037. The magazines don't fit in the EAA Witness Elite Limited.
This magazine doesn't fit the Witness PS (small frame polymer) or the small frame metal EAA Witness/Tanfoglio.
Mec-Gar is now the OEM supplier of the Tanfoglio magazines and these magazines are Mec-Gar's aftermarket version of the factory magazine that they make.
How to determine if you need the Witness Large Frame or Small Frame magazines:
Prior to 2005 the EAA Witness was produced in both small frame and large frame configurations, depending on the caliber and frame material. The Witness Classics and EAA Witness pistols made prior to 2005 in either 9mm or .40 S&W take small frame magazines. The .38 Super, .45 acp and 10mm models are all considered large frame pistols. Witness P in full size, Witness Steel, Elite and the Xtreme line models made after 2005 take large frame magazines. However the EAA Witness P-S (small frame polymer) use the small frame magazines. If your pistol takes the Witness magazine #101900 you need the small frame 9mm magazines. The small frame magazines are approximately 0.796” thick (side to side) and 1.25 long (front to back). The large frame magazines are approximately .843” thick (side to side) and 1.369 long (front to back). The large frame 9mm magazines have grooves down the sides of the magazine tube, the small frame 9mm magazines are smooth on the sides. The EAA Witness 9mm small frame magazines used to hold 16 rounds now both the EAA Witness 9mm small frame and large frame magazines hold 17 rounds. Neither the large or small frame .40 S&W magazine tubes have grooves on the sides of the magazine tubes. The small frame EAA Witness .40 S&W magazines hold 12 rounds and the EAA Witness .40 S&W large frame magazines hold 14 rounds.
Small Frames include all Witness PS, Witness Classics and firearms produced in 9mm or 40sw previous to the year2005.
SKU'S that will fit this category:
999048 40sw Fullsize / Comp Slide
999044 9mm Fullsize / Comp Slide
999244 9mm Fullsize / Full Slide
999644 9mm Fullsize / Grey Ghost
PAVONA's / COMPACT
Large Frame models include:
Witness P in Full Size, Compact, or P Carry,
Witness Classic 2's, and late model (post 2005)
Witness Elite and the entire Xtreme line of firearms.
All calibers in 10mm, .38 Super & .45acp are considered to be large frames regardless of the year it was produced.
Witness Elite & Xtreme Gold Teams, Limited’s require an Aluminum Base Pad in addition to a magazine.
Constructed from certified carbon steel and features a heat treated housing and high-impact polymer or certified carbon steel follower and floorplate. The magazine spring is made of high strength type "D" music wire-the strongest wire available. TIG welding provides additional strength and a seamless finish. Each magazine surface is specially treated to ensure high corrosion resistance.
Mec-Gar is proud to be the Original Equipment Manufacturer of magazines to most of the prominent firearm manufacturers for the last 40 years including AMT - Armscor - Astra - Beretta Bernadelli - FN Browning - BUL - Charles Daly - Colt - CZ - IMI - Kel-Tec - Kimber - Llama - North American Arms - Remington - Sigarms - Smith & Wesson - Springfield Armory - STI - Standard Arms - Star - Steyr - Tanfoglio - Taurus - Walther