Armscor MAP1 FS / Rock Island MAP1 MS 9mm, Rock Island Armory MAPP1 FS/MS, Witness / Tanfoglio Small Frame 9mm 17 RD Mec-Gar MGWIT9SFAFC

Armscor MAP1 FS / Rock Island MAP1 MS 9mm, Rock Island Armory MAPP1 FS/MS, Witness -Tanfoglio full-sized small frame 17-round 9mm Mec-Gar magazine with the anti-friction coating MGWIT9SFAFC. Fits the EAA Witness - Tanfoglio small frame steel with the narrower magwell, Tanfoglio TA90, Not for the pre 88 series models (the pre B CZ 75 factory magazines should work in those), TZ-75, EAA Witness PS, ARSENAL STRIKE ONE, Springfield Armory P9, Jericho 941 (also imported as the Uzi Eagle), Baby Eagle, the Desert Eagle Pistol built with Tanfoglio supplied parts (a Tanfoglio CZ 75B clone), Baby Desert Eagle III, ITM AT-84 , Bul Storm and the post-2005 production Bul Cherokee (polymer framed with the rail) Bul Cherokee AND Bul Cherokee Compact. I have been told that the pre-2005 Bul Cherokee (polymer framed with no rail) uses the CZ 75B magazines.  

The magazine will function in the Arsenal Strike One however, it won't hold the slide open after the last round.

A customer told me this magazine is compatible with the SPHINX/Phoenix pistols below and functions perfectly.

3009

AT2000S

PHOENIX FUSION STANDARD

PHOENIX REDBACK

ITM AT84S (PRE-SPHINX)

It does not fit in the older SPHINX 3000 

SKU: MGWIT9SFAFC — UPC: 765595750005

This is the magazine for the small-framed metal EAA Witness / Tanfoglio and the EAA Witness PS (small frame polymer) pistols with the narrow magwell. If your pistol takes Witness magazine #101900, this is the magazine you need. The large frame metal and polymer pistols with the wider magwell take a different, wider magazine that I also stock. Mec-Gar is now the OEM supplier of the Tanfoglio magazines. These magazines are the Mec-Gar's aftermarket version of the factory magazine they make. 

How to determine if you need the Witness Large Frame or Small Frame magazines:

Before 2005, the EAA Witness was produced in both small-frame and large-frame configurations, depending on the caliber and frame material. The Witness Classics and EAA Witness pistols made before 2005 in either 9mm or .40 S&W take small frame magazines. The .38 Super, .45 ACP, and 10mm models are all considered large-frame pistols. Witness P in full size, Witness Steel, Elite, and the Xtreme line models made after 2005 take large frame magazines. However, the EAA Witness P-S (small frame polymer) uses small frame magazines. If your pistol takes the Witness magazine #101900, you need the small-frame 9mm magazines. The small frame magazines are approximately 0.796” thick (side to side) and 1.25 long (front to back). The large frame magazines are approximately .843” thick (side to side) and 1.369 long (front to back). The large frame 9mm magazines have grooves down the sides of the magazine tube, and the small frame 9mm magazines are smooth on the sides. The EAA Witness 9mm small frame magazines used to hold 16 rounds; now both the EAA Witness 9mm small frame and large frame magazines hold 17 rounds. Neither the large nor the small frame .40 S&W magazine tubes have grooves on the sides of the magazine tubes. The small frame EAA Witness .40 S&W magazines hold 12 rounds, and the EAA Witness .40 S&W large frame magazines hold 14 rounds. 

All the magazines are also offered in a magazine limited to 10 rounds.

Small Frames include all Witness PS, Witness Classics, and firearms produced in 9mm or 40 S&W before 2005.

SKU'S that will fit this category:

999048 40sw Fullsize / Comp Slide

999044 9mm Fullsize / Comp Slide

999244 9mm Fullsize / Full Slide

999644 9mm Fullsize / Grey Ghost

PAVONA's / COMPACT

Large Frame models include:

Witness P in Full Size, Compact, or P Carry

Witness Classic 2's, and late model (post 2005)

Witness Steel

Witness Elite and the entire Xtreme line of firearms.

All calibers in 10mm, .38 Super, and .45 ACP are considered to be large frames regardless of the year it was produced.

Witness Elite & Xtreme Gold Teams and Limited require an Aluminum Base Pad in addition to a magazine. 

Constructed from certified carbon steel and features a heat-treated housing and high-impact polymer or certified carbon steel follower and floorplate. The magazine spring is made of high-strength type "D" music wire, the strongest wire available. TIG welding provides additional strength and a seamless finish. Each magazine surface is specially treated to ensure high corrosion resistance.
 

Mec-Gar is proud to be the Original Equipment Manufacturer of magazines to most of the prominent firearm manufacturers for the last 40 years, including AMT - Armscor - Astra - Beretta Bernadelli - FN Browning - BUL - Charles Daly - Colt - CZ - IMI - Kel-Tec - Kimber - Llama - North American Arms - Remington - Sigarms - Smith & Wesson - Springfield Armory - STI - Standard Arms - Star - Steyr - Tanfoglio - Taurus - Walther.